121″ Ultra Short Throw Projector Screen
Dimensions of an exactly 121″ diagonal 16:9 aspect ratio projected image are 105.5″ wide by 59.3″ high. The recommended distance for viewing an ultra short throw projector and 121″ projection screen is within the 12.1′ to 18.2′ range.
Check out the 121″ diagonal ultra short throw projector screen featured below. It is a wall/ceiling mount electric motorized drop-down UST screen. I dislike the idea of setting an expensive ultra short throw projector directly on the floor, and thus will not include a floor-rising screen on this page.
121″ Motorized Drop-Down Lenticular
Lowering and rising on command to provide a tab-tensioned flat, taut, and ripple-free projection surface, the Elite Screens STT121XH2-CLR3 Starling Tab-Tension 121″ diagonal electric motorized drop-down ultra short throw projector screen uses StarBright CLR 3 screen material with a lenticular sawtooth micro-structure to reflect a UST projector’s image back to you while also absorbing up to 90% of ceiling overhead ambient light. It features 0.8 gain and a 170° viewing angle.
Included are a pair of wall brackets for flush wall or ceiling installation, as well as a pair of eye-bolt screws that attach to the top of the case for suspended ceiling installation. Must be plugged into an AC outlet for power. Programmable vertical drop position for precise installation. SWIFT RC-1 control system includes IR, RF, and wall box controller remotes. Wall box and RF remote are 12v trigger ready. Width of the screen’s white housing is 119.8″ and screen’s overall fully-extended height is 78.1″ including housing and 12″ top and 2.2″ bottom black masking. Weighs 47.6 pounds. Packaging dimensions are about 128″ x 9″ x 8″ and it weighs about 62 pounds. [Elite Screens link] [buy at Amazon]
UST Projector and 121″ Screen Placement
Back of AWOL Vision LTV-3500 Pro ultra short throw projector should be placed about 13.9″ away horizontally from vertical plane of 121″ screen, making the bottom of its projected image about 17.1″ vertically above the bottom of UST projector.
Back of Hisense L9Q ultra short throw projector should be placed about 8.7″ away horizontally from the vertical plane of 121″ screen, making the bottom of its projected image about 16.3″ vertically above the bottom of the UST projector.
Back of Hisense PX3-PRO ultra short throw projector should be placed about 12.6″ away horizontally from the vertical plane of 121″ screen, making the bottom of its projected image about 17.9″ vertically above the bottom of UST projector.
Back of NexiGo Aurora Pro MKII ultra short throw projector should be placed about 10.7″ away horizontally from the vertical plane of 121″ screen, making the bottom of its projected image about 15.3″ vertically above the bottom of UST projector.
Back of XGIMI AURA 2 (new) ultra short throw projector should be placed about 10.5″ away horizontally from the vertical plane of 121″ screen, making the bottom of its projected image about 16.7″ vertically above the bottom of UST projector.
Page last updated 10/30/2025.